2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm
ETCR7000A series of Large Caliber Leakage Clamp Meter’s clamp core is made of special alloy, adopt the latest magnetic shielding techniques, can almost shield the influence from external magnetic field, to ensure the high precision, high stability and high reliability of perennial uninterrupted measurement. The meter can store 200 sets of data, with RS232 interface, upload stored data to the computer through the system software, implementing online real-time monitoring, historical inquires, dynamic display. With the function of historical data read, export, print, and backlight, data hold, etc. It is a necessary tool for electrical safety testing.
Specification
Function | Measure AC leakage current, current, there-phase, voltage |
Power | 6V DC(LR6×4 alkaline dry batteries, continuously working for 12 hours) |
Test Mode | Clamp CT, integral mode |
Clamp Size | 80mm×80mm(can clamp electric cable of 80mm diameter, or 96mm×4mm flat cable and steel earth wires) |
Current Range | 0.00mA~2000A |
Current Resolution | 0.01mA |
Voltage Range | AC0.00V~600V |
Voltage Resolution | 0.01V |
Measurement Accuracy (23°C±3°C, below 70%RH, measured wire at the center of the clamp) | 0.00mA~300A: ±1.5%±3dgt |
300A~1200A: ±2%±3dgt | |
1200A~2000A: ±3%±3dgt | |
0.00V~600V: ±1.5%±3dgt | |
Measured Wire Position | Measured wire at approximately the geometric center of the clamp |
Data Storage | 200 sets, “FULL” symbol indicate the memory is full |
RS232 Interface | With RS232 interface, download data to computer for analysis and management |
Communication Wire | RS232 communication wire, 1.8m |
Frequency | 50Hz ,60Hz automatic identification |
Gear Shift | Automatic shift |
Sample Rate | About 2 times/second |
Line Voltage | Below AC 600V line measurement |
Display Mode | LCD: 128dots×64dots; Display area: 43mm×29mm |
Meter Size | Length 275mm × Width 145mm × Height 40mm |
Backlight | Controlled by LIGHT key |
Data Hold | “HOLD” symbol appears |
Overflow | “OL” symbol appears |
Automatic Shutdown | Automatically shutdown about 15 minutes after power on to reduce battery consumption |
Voltage Detection | Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 5.2V. |
Weight | 1kg(with batteries and accessories) |
Working Current | 50mA with enabled backlight; 25mA with disabled backlight |
Working Temperature and Humidity | -10°C~40°C; 80%rh |
Storage Temperature and Humidity | -10°C~60°C; below 70%rh |
Insulation strength | AC 2kV/rms(between core and shell) |
Safety Specifications | IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT III(600V) |
Accessories | Main Unit: 1 pc; Test Line: 4 pcs (3 red, 1 black); RS232 Data Line: 1 pc; Disk: 1 pc; Meter Box: 1 pc; User Manual: 1 pc; GuaranteeCard: 1 pc; Certification: 1 pc |
General | |
Range | 0-2000A |
Original | Taishan |
Resolution | 0.01mA |
2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm
- Brand: ROKTOOLS
- Product Code: CLME-2212
- Availability: In Stock
-
$339.86
Related Products
UT256B 200A Clamp Meter Digital Fork Meter Multimeter
UT256B True RMS Clamp Meter Digital Fork Meter Multimeter AC/DC Volotage Current Resistance Capacita..
$86.40
0.000Ω~2000Ω Grounding Grid Earth Resistance Tester
0.000Ω~2000Ω Grounding Grid Earth Resistance Tester Features: Measurement of..
$2,478.00
Flexible Clamp Meter 3000A AC Current Voltage Tester
Flexible Clamp Meter 3000A AC Current Voltage Tester Flex Clamp meter ..
$178.99
UT601 Inductance Capacitance Meter Diode Capacitor Tester
UT601 Inductance Capacitance Meter Diode Capacitor Tester UT600 series digit..
$64.55
UT213C 400A Digital Clamp Meters AC DC Current Meter
UT213C 400A Digital Clamp Meters LCD Digital Clamp Multimeters True RMS 600V/400A 10Hz~1MHz Digital ..
$65.66
UT522 Electrical Installation Tester Digital Earth Resistance Tester Ground Earth Resistance
UT522 Electrical Installation Tester Digital Earth Resistance Tester Ground Earth Resistance &nbs..
$211.33
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Cheap 4-Terminal Earth Ground Resistance and Soil Resistivity Tester
4-Terminal Earth Ground Resistance and Soil Resistivity Tester SpecificationsMaximal ear..
$158.99
Tags: 2000A Digital Clamp Meter 80, mm CT Current AC/DC Voltage Ohm 200 sets Data Storage Tong Tester
Featured
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat Features: -Graduation: metric&nb..
$220.00
0-50mm Outside Caliper Gauge With 500mm Deep Throat
0-50mm Outside Caliper Gauge With 500mm Deep Throat It measure thickness appli..
$199.00
0-50mm Caliper Gauge With Long Arm 300mm Depth
0-50mm Caliper Gauge 300mm Long Jaw Features: -Graduation: metric 0.05mm -Packed..
$137.00
0-50mm Outside Caliper Gauge With 200mm Depth
0-50mm Caliper Gauge 200mm Depth Features: -Graduation: metric 0.05mm -Pin ..
$109.00
0-50mm Caliper Gauge With Extended Arm 150mm
0-50mm Caliper Gauge With Extended Arm Up to 150mm Depth Features: -Graduation: metric &n..
$89.00
Roller Type Digital Caliper With Wheel 10-300mm
Roller Type Digital Caliper With Wheel The caliper jaw was attached two wheels(rolle..
$330.00
46 Pcs Gauge Block Set 1.001–100 mm Slip Gauge
Roktools 46 Pcs Gauge Block Set 1.001–100 mm Slip Gauge Steel JO Block With Factory Test Repor..
$238.00
90 Degree Engineering Square with Base Flat Edge Machinist's Square
DIN 875 Engineering Square with Base 50*40mm Features: With a wide base giving stable support ..
$22.00