Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
| Selection Table | |
| Model | PQAN7610 |
| Standard compliance | IEC61000-4-30 Class A |
| Volt Amp Hz | ● |
| Dips and swell | ● |
| Harmonics | ● 100th Max. |
| Power and energy | ● |
| Unbalance | ● |
| Monitor | ● |
| Inrush | ● |
| Flicker | ● |
| Transients | ● |
| 400Hz | ● |
| Wave Recording | ● |
| Sample rate | 163.84kS/s （50/60Hz） |
| TF Card | 32GB |
| Battery | Lithium ion, 7.4V 5200mAh |
| GPS/Beidou time synchronization | ● (option) |
| WIFI | ● |
| Input Characteristics | |
| Number of inputs | 4 (3 phase + neutral) DC coupling |
| Voltage Inputs | |
| Max. input voltage | 1000Vrms |
| Max. peak measurement voltage | 6kV |
| Input Impedance | 4MΩ |
| Current Input | |
| Type | Clamp or current transformer with mV output |
| Input Range | depends on supplied current clamp |
| Input Impedance | 50kΩ 100kΩ (SA2200) |
| Sampling System | |
| Resolution | 8 channels 16 bits AD |
| Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
| Measurement | |||
| Measurement Range | Resolution | Accuracy | |
| Voltage/Current/Frequency | |||
| Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
| Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
| V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
| Arms（AC） 10mV/A 1mV/A 65mV/1000A (AC) |
|||
| 0~150A | 0.01A | ±0.1%±0.1A | |
| 1~2000A | 0.01A | ±0.1%±0.1A | |
| 10~6000A | 0.01A | ±1%±2A | |
| A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
| Frequency | 42.5~57.5（50Hz nominal） | 0.01Hz | ±0.01Hz |
| 51~69（60Hz nominal） | 0.01Hz | ±0.01Hz | |
| 320~480（400Hz nominal） | 0.01Hz | ±0.01Hz | |
| Dips & Swells | |||
| Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
| Arms1/2 | depends on current clamps | 0.01A | ±1% |
| Harmonic (IEC61000-4-7) | |||
| Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
| Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
| THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
| Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
| Power and Energy | |||
| P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
| PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
| kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
| Flicker (IEC61000-4-15) | |||
| Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
| Unbalance | |||
| Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
| Current | 0.0 ~ 20.0% | 0.1% | ±1% |
| Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
| Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
| Voltage Transient | |||
| Vpk | ±6000Vpk | 1V | ±15% |
| Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
| Min. Test Time | 6.5us | ||
| Inrush Current | |||
| Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
| Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
| Logger | |||
| Recording | user-defined parameters for 4 phases at the same time | ||
| Memory | Data stored in TF card, 32GB | ||
| Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
| Interval | 1s to 60 minutes | ||
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
| General | |
| Batteries Inside | Lithium ion, 7.4V 5200mAh |
| Characteristic | Dips and swell, Harmonic（IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
UT267B Digital Auto 3 Three Phase Clamp Meter VA Voltammeter Ammeter
UT267B Digital Auto 3 Three Phase Clamp Meter VA Voltammeter Ammeter Features: 1. Measur..
$860.00
UT511 Digital Insulation Resistance Tester Megohmmeter Megger AC DC Volttage Continuity Tester
UT511 Digital Insulation Resistance Tester Megohmmeter Megger AC DC Volttage Continuity Te..
$195.99
Process Calibrator Frequency Current Voltage
Handheld Process Calibrator Frequency Current Voltage Precision current voltage frequency calibra..
$276.99
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator ntroduction to MR9270S + HART ..
$245.00
Portable Digital Oscilloscope 500M Sampling Rate 10MHz Analog Bandwidth
(Discontinue)Anti-Drop Portable Digital Oscilloscope 500M Sampling Rate 10MHz Analog BandwidthProduc..
$71.99
UT658B USB Tester Mobile Phone Notebook Mobile Voltage Alarm
UT658 USB tester is a new equipment to test the quality of charger/power bank fo..
$19.66
600V Digital 3 Phase Voltmeter 60Hz Frequency Tester
600V Digital 3 Phase Voltmeter 60Hz Frequency Tester Function Measure t..
$184.99
UT261B Phase Sequence Motor Rotation Indicators Tester Meter
UT261B Phase Sequence Motor Rotation Indicators Tester Meter (Discountinued) Features: LE..
$79.99
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
-200x200.jpg "DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide")
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
-200x200.jpg "Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper")
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat Features: -Graduation: metric&nb..
$220.00
0-50mm Outside Caliper Gauge With 500mm Deep Throat
0-50mm Outside Caliper Gauge With 500mm Deep Throat It measure thickness appli..
$199.00
0-50mm Caliper Gauge With Long Arm 300mm Depth
0-50mm Caliper Gauge 300mm Long Jaw Features: -Graduation: metric 0.05mm -Packed..
$137.00
0-50mm Outside Caliper Gauge With 200mm Depth
0-50mm Caliper Gauge 200mm Depth Features: -Graduation: metric 0.05mm -Pin ..
$109.00
0-50mm Caliper Gauge With Extended Arm 150mm
0-50mm Caliper Gauge With Extended Arm Up to 150mm Depth Features: -Graduation: metric &n..
$89.00
Roller Type Digital Caliper With Wheel 10-300mm
Roller Type Digital Caliper With Wheel The caliper jaw was attached two wheels(rolle..
$330.00
-200x200.jpg "46 Pcs Gauge Block Set 1.001–100 mm Slip Gauge")
46 Pcs Gauge Block Set 1.001–100 mm Slip Gauge
Roktools 46 Pcs Gauge Block Set 1.001–100 mm Slip Gauge Steel JO Block With Factory Test Repor..
$238.00
90 Degree Engineering Square with Base Flat Edge Machinist's Square
DIN 875 Engineering Square with Base 50*40mm Features: With a wide base giving stable support ..
$22.00