Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
Ask sales reps for details.
Part No: PQAN7620
Features:
More accurate up to 0.1% on Vrms(voltage), Frequency: 0.01Hz
Meet standard: IEC61000-4-30 Class S
Phase: -180~180
Lart 5.6 inch TFT LCD 640*480 resolution
With USB and lan interface
Safety standard: IEC61010-1 ,Safety Degree: 600V CAT IV 1000V CAT III
Specification:
Selection Table | |
Model | PQAN7610 |
Standard compliance | IEC61000-4-30 Class A |
Volt Amp Hz | ● |
Dips and swell | ● |
Harmonics | ● 100th Max. |
Power and energy | ● |
Unbalance | ● |
Monitor | ● |
Inrush | ● |
Flicker | ● |
Transients | ● |
400Hz | ● |
Wave Recording | ● |
Sample rate | 163.84kS/s (50/60Hz) |
TF Card | 32GB |
Battery | Lithium ion, 7.4V 5200mAh |
GPS/Beidou time synchronization | ● (option) |
WIFI | ● |
Input Characteristics | |
Number of inputs | 4 (3 phase + neutral) DC coupling |
Voltage Inputs | |
Max. input voltage | 1000Vrms |
Max. peak measurement voltage | 6kV |
Input Impedance | 4MΩ |
Current Input | |
Type | Clamp or current transformer with mV output |
Input Range | depends on supplied current clamp |
Input Impedance | 50kΩ 100kΩ (SA2200) |
Sampling System | |
Resolution | 8 channels 16 bits AD |
Sampling Rate | 163.84kS/s (50/60Hz), 8 channels sample
synchronously (SA2200) |
Measurement | |||
Measurement Range | Resolution | Accuracy | |
Voltage/Current/Frequency | |||
Vrms(AC+DC) | 1 ~ 1000Vrms | 0.01Vrms | ±0.1% of nominal
voltage |
Vpk | 1 ~ 1400Vpk | 0.01Vpk | ±0.5% of nominal
voltage |
V(Crest Factor) | 1.0 ~ >2.8 | 0.01 | ±5% |
Arms(AC) 10mV/A 1mV/A 65mV/1000A (AC) |
|||
0~150A | 0.01A | ±0.1%±0.1A | |
1~2000A | 0.01A | ±0.1%±0.1A | |
10~6000A | 0.01A | ±1%±2A | |
A(Crest Factor) | 1 ~ 10 | 0.01 | ±5% |
Frequency | 42.5~57.5(50Hz nominal) | 0.01Hz | ±0.01Hz |
51~69(60Hz nominal) | 0.01Hz | ±0.01Hz | |
320~480(400Hz nominal) | 0.01Hz | ±0.01Hz | |
Dips & Swells | |||
Vrms1/2 | 0 ~ 200% of nominal voltage | 0.01Vrms | ±0.2% |
Arms1/2 | depends on current clamps | 0.01A | ±1% |
Harmonic (IEC61000-4-7) | |||
Harmonic Number | 1 ~ 100(50/60Hz) (IEC61000-4-7) 1~12(400Hz) | ||
Harmonic Voltage %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
Harmonic Current %f | 0.0 ~ 100.0% | 0.01% | ±0.1% ± nx0.1% |
THD | 0.0 ~ 100.0% | 0.01% | ±2.5% |
Phase | -180° ~180 0° | 0.1° | ± nx0.1° |
Power and Energy | |||
P, S, Q1 | Max. 6000MW | 0.1kW | ±1%±10 digits |
PF & cosФ | 0 ~ 1 | 0.01 | ±0.1% |
kWh, kVAh, kvarh | depends on nominal voltage and current clamps | ±1%±10 digits | |
Flicker (IEC61000-4-15) | |||
Pst(10min)/Plt (2 hrs) | 0.00 ~ 20.00 | 0.01 | ±5% |
Unbalance | |||
Voltage | 0.0 ~ 20.0% | 0.1% | ±0.1% |
Current | 0.0 ~ 20.0% | 0.1% | ±1% |
Voltage Phase | -360° ~ 0° | 0.1° | ±0.1° |
Current Phase | -360° ~ 0° | 0.1° | ±0.5° |
Voltage Transient | |||
Vpk | ±6000Vpk | 1V | ±15% |
Vrms | 10 ~ 1000Vrms | 1V | ±2.5% |
Min. Test Time | 6.5us | ||
Inrush Current | |||
Arms | depends on current clamps | 0.01 | ±1% ± 5digits |
Inrush Duration | 1 ~ 32min selectable | 10ms | ±20ms |
Logger | |||
Recording | user-defined parameters for 4 phases at the same time | ||
Memory | Data stored in TF card, 32GB | ||
Duration Time | 2 hrs to 1 year, depends on the recording items and time interval | ||
Interval | 1s to 60 minutes |
CT clamps: (Option)
A: Range: 5A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 45Hz~55Hz Clamps Radius: 8mm
Size: 158*43*24mm
B: Range: 50A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 8mm
Size: 171*46*27mm
C: Range: 100A, Output Voltage Ratio: 10mV/A Accuracy: 0.2%
Working Frequency: 50Hz~400Hz Clamps Radius: 13mm
Size: 174*52*27mm
D: Range: 1A~1000A, Output Voltage Ratio: 1mV/A Accuracy: 1%
Working Frequency: 40Hz~100Hz Clamps Radius: 52mm
Size: 111*216*45mm
E: Flex type Primary Current Rating: 3000A , Output Voltage Ratio: 65mV/1000A
Range: 15A~3000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
F: Flex type Primary Current Rating: 5000A , Output Voltage Ratio: 50mV/1000A
Range: 20A~1000A Accuracy: 1%+position Error
Maximum Allowable imput: 100KA Phase Error: Less than 1%
Noise: less than 2mVrms(10Hz~10Khz) Frequency Characteristic: 10Hz~10KHz(-3db)
Weight: 130g Length: 200cm CT perimeter: 50cm Postion Error: 2%
General | |
Batteries Inside | Lithium ion, 7.4V 5200mAh |
Characteristic | Dips and swell, Harmonic(IEC61000-4-30), Power and Energy |
Power Quality Analyzer Class A Energy Analyzer Harmonic Tester
- Product Code: PQAN-7620
- Availability: 2-3 Days
-
$3,328.00
Related Products
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator
MR9270S Signal Generator PT100 Analogs Voltage Current Calibrator ntroduction to MR9270S + HART ..
$245.00
2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm
2000A Digital Clamp Meter 80mm CT Current AC/DC Voltage Ohm Large Caliber Leakage Clamp Meter i..
$339.86
Battery Coulomb Counter 50/350/100/500A Battery Capacity Indicator
Battery Coulomb Counter 50/350/100/500A Battery Capacity Indicator 8-120V 50A&nbs..
$39.99
Digital Oscilloscope Portable PC Based 2 Channels USBXITM
Digital Oscilloscope Portable PC Based 2 Channels USBXITM Interface Features: Standar..
$79.99
UT219E UT219M UT219DS Digital Clamp Meter True RMS LoZ Tester
UT219E UT219M UT219DS Digital Clamp Meter True RMS LoZ Tester Resistance Capacitance Frequency Tempe..
$162.76
UT213C 400A Digital Clamp Meters AC DC Current Meter
UT213C 400A Digital Clamp Meters LCD Digital Clamp Multimeters True RMS 600V/400A 10Hz~1MHz Digital ..
$65.66
UT512 Digital Insulation Resistance Tester Megohmmeter With Comparison Voltmeter
UT512 Digital Insulation Resistance Tester Megohmmeter With Comparison Voltmeter UT510 series tes..
$269.50
200GΩ Insulation Resistance Tester 750V Megohm Meter
Roktools 200GΩ Insulation Resistance Tester 750V Megohm Meter Electrical Testing Resistance Me..
$149.00
Tags: Power Quality Analyzer, Energy Analyzer, Harmonic Power Analyzer
Featured
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide
DIN 862 Digital Caliper Extra Large Display Vernier Caliper Slide ISO17025 Not Including Th..
$28.99 $35.99
Steel Wire Rope Hoisting Cable Diameter Digital Caliper Sponge Thickness Vernier Caliper
Steel Wire Rope Hoisting Cable Diameter Digital Caliper With Large Measuring Jaw Sponge Th..
$77.99
Universal Bridge Cam Welding Gage
Universal Bridge Cam Welding Gage WGU-8M WG-218 is updated from ROK WG-208, These two ..
$18.99
Dual Range NCV test 35/6 Bit Digital Multimeter
Dual Range NCV test 35/6 Bit Digital Multimeter Features: 1. AC DC measureme..
$48.90
Latest
Non Magnetic Micrometer 0-100mm Antimagnetic Outside Micrometer
Non Magnetic Micrometer 0-100mm Antimagnetic Outside Micrometer The tips are made of materi..
$310.00
Stainless Steel Wet Film Comb Thciness Gauge 50-10000um
Stainless Steel Wet Film Comb Thciness Gauge Size: Size:Approx.100x42mm/3.94x1.65inch Ran..
$8.88
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat
100mm Long Reach Outside Caliper Gauge With 500mm Deep Throat Features: -Graduation: metric&nb..
$220.00
0-50mm Outside Caliper Gauge With 500mm Deep Throat
0-50mm Outside Caliper Gauge With 500mm Deep Throat It measure thickness appli..
$199.00
0-50mm Caliper Gauge With Long Arm 300mm Depth
0-50mm Caliper Gauge 300mm Long Jaw Features: -Graduation: metric 0.05mm -Packed..
$137.00
0-50mm Outside Caliper Gauge With 200mm Depth
0-50mm Caliper Gauge 200mm Depth Features: -Graduation: metric 0.05mm -Pin ..
$109.00
0-50mm Caliper Gauge With Extended Arm 150mm
0-50mm Caliper Gauge With Extended Arm Up to 150mm Depth Features: -Graduation: metric &n..
$89.00
Roller Type Digital Caliper With Wheel 10-300mm
Roller Type Digital Caliper With Wheel The caliper jaw was attached two wheels(rolle..
$330.00