Concrete Rebound Tester Schmidt Hammer Sclerometer

Description

INTRODUCTION:

The meter is in accordance with technical regulation ofJGJ/T23-2001,used for testing of concrete compressive strength within the scope of10-60Mpa, with the system standard energy of2.207J, and value indicating system of pointer direct reading. Our concrete resiliometer has been approved as “Recommended Product for Engineering Construction’’By the Ministry of construction.

Shanxi Institute of Building Research, who composed "Testing Concrete Compressive Strength Technical Regulation of JGJ/T23-2001 with Spring back Method", supervises the manufacturing process.

Concrete test hammer generally applied to test the strength of concrete components, such as building, panels, beams, columns, bridges.

Feature

• Light saving 2/3 forces compared with counterpart products

• Flexible, inexpensive, power-free, easy to master

• The button applies stretching technics and is not easy to fall off

• The pointer is easy to adjust friction

• The first choice applicable for on-the-spot NDT

III.Main Technical Parameter:

• Length of pointer: 20.0±0.2(mm)

• Friction of pointer: 0.65±0.15(N)

• Sphere semidiameter at the end of the flip rod: 25±1.0(mm)

• Rigidity of flip tensioned spring: 785.0±40.0(N/m)

• Location of flip hammer's hook release: "100" at the scale mark

• Work length of flip tensioned spring: 61.5.0±0.3(mm)

• Strike length of flip hammer: 75±0.3

• Hop location of the flip hammer: "0" at the graduated scale

• Fixed value of steel anvil: 80±2 (our products are controlled between 80-81)

• IV.Shipping

• 
  

• A resiliometer

• Grindstone,

• Flip tension spring

• Buffer spring

• Screwdriver

• Instruction

Specifications

• Length of pointer: 20.0±0.2 (mm)

• Friction of pointer: 0.65±0.15 (N)

• Sphere semi diameter at the end of the flip rod: 25±1.0 (mm)

• Rigidity of flip tensioned spring: 785.0±40.0 (N/m)

• Location of flip hammer's hook release: "100" at the scale mark

• Work length of flip tensioned spring: 61.5.0± 0.3(mm)

• Strike length of flip hammer: 75±0.3(mm)

• Hop location of the flip hammer: "0" at the graduated scale

• Fixed value of steel anvil: 80±2 (our products are controlled between 80-81)

Package Content

• ZC3-A  Concrete Rebound Hammer Tester

• Grindstone

• Flip tension spring

• Buffer spring

• Screwdriver

• InstructionManual